K2 SIGMA ist eine Verbindung aus Edellen und syntetischen Polymeren, die einen besonderen Reifenschutz vor Verblassen, Rissen sowie vorzeitiger Alterung gewhrleisten. Extrem leicht in der Anwendung entsteht ein Ergebnis ohne Schlieren oder Streifen. Die auf der Oberflche entstandene, wasserabweisende und transparente Schutzschicht fliet nicht bei Regen ab. Beim regelmiger Anwendung hlt der Effekt sogar ein paar Wochen an. K2 SIGMA ist beim Warten von Gummidichtungen und Kunststoffteilen bestens geeignet. Hinterlsst einen angenehmen Duft.
K2 QUANTUM ist ein außerordentliches Produkt, basierend auf höchstqualitativen Polymeren, die einen dauerhaften Lackschutz garantieren. Nach der Anwendung wird der Lack ideal glatt. Die Oberflchenspannung von Wassertropfen steigt, wodurch das Wasser besser abfliet.
K2 SPECTRUM: einzigartiger Quick-Detailer und flssiges synthetisches Wachs (2 in 1). Einfach aufsprhen und abwischen - ohne Warten, bis das Wachs trocken wird. Spectrum lsst sich leicht polieren und hinterlsst keine Schlieren. Geeignet fr Karosserielacke aller Art. Man kann es auch auf vorbeheizter Oberflche verwenden. Besitzt Tausende von Einsatzmglichkeiten. Ideal fr die optische Erneuerung von Kunststoffen, Scheinwerfern, Cockpit-, Chrom- sowie Gummielementen, Reifen, Leder oder Scheiben.
An ultra-fast agent for maintenance of quartz and ceramic coatings. Recommended for periodically refreshing of K2 Gravon (G030) ceramic coating. Provides lubricity, deep lustre and colour of the paintwork, features outstanding hydrophobic parameters. Decreases the risk of leaving small scratches. Also recommended for uncoated varnish protection, to use on plastics, rubber and glass. Durability of 3-6 months depends on the using conditions.
K2 Proton is a highly efficient and effective protective wax, based on the hardest know Carnauba wax. Provides mirror shine and intensifies paintwork colour. Easy to apply and polish. For a long protection period, even up to dozen or more wash cycles. After its application the paint becomes completely smooth allowing water droplets to runoff the paintwork.
Directions:
Wash and dry the paintwork before using the product. In order to reach maximum durability use K2 Clay bar (L700) to remove deposits and K2 Klinet (L761) to degrease paintwork.
Apply the wax with a sponge on max 1-2 elements at a time.
Let it dry for 2-5 minutes (no fingerprints left after touch)
Polish with a microfibre.
Note: Do not use on direct sunlight or heated surface
Die Knete nimmt alle in den Lack-Mikroporen beliebige Verschmutzungen, Teer, Insektspuren, Straßenschmutz, u.a. auf. Sicher für alle Lackarten, erzeugt keine Matt- und Rissflächen. Es wird empfohlen, das Produkt vor dem Polieren und Wachsauftragen anzuwenden. Es ist auch fürs Felgenreinigen von hartnäckigem, aus Bremsklötzen stammenden Schmutz bestens geeignet. Man kann es mühelos kneten und formen.
Ein einzigartiges Anwendungssystem, das vorhandende
Luftmoleküle in den Bremsen völlig eliminiert und sie mit
einer speziellen Bindung, mit Glas verbunden, füllt. Das
Harz wird ausgehärtet, wenn es Sonnenlicht ausgesetzt wird.
Abschließend wird das Produkt vollständig transparent und
macht die Reparatur damit unsichtbar.
Ceramic coating
Ceramic coating is currently known in the world as the most durable form of protection for paintwork and other surfaces. It ensures the highest protection level and much higher hardness than the hardest varnishes. After use on the paintwork surface it builds a transparent and invisible layer 2-3 microns thick, thanks to which the paintwork is completely isolated from the effects of all external factors.
Technology
Based on the latest technology, we have created a product for the most demanding automotive enthusiasts, ensuring 100% satisfaction with the final effect. Ceramic coating K2 GRAVON is one of the most innovative products that we offer, based on nanotechnology and strictly designed to guarantee the best result.
Advantages
K2 GRAVON protects the surface from scratches, dirt, UV rays, grit salt, bird droppings, rains and tree sap, remnants of insects, corrosion and mechanical damages, caused for example by stone hits.
It also protects against the appearance of gloss reducing defects, especially circular scratches. Thanks to the ceramic coating, there is no need to wax the vehicle. Furthermore, due to the excellent dirt repulsion and selfcleaning properties the need for vehicle wash can be also reduced.
In contrast to waxes, ceramic coating cannot be washed off with chemical agents, and so it is the most stable manner known for surface protection. The only way the coating can be removed is machine polishing. This coating also protects against graffiti as the paint does not stick to the surface and can be easily removed.
Application
K2 GRAVON coating can be applied not only to the paintwork, but also to rubber, plastic, metal and glass. It can be highly recommended for various automotive, yachting, aviation and industrial applications.
Directions
Optimum application conditions:
Surface temperature between 10-35°C.
Apply indoors or in shaded areas.
Do not apply in excessive humidity conditions.
Surface preparation:
Clean and thoroughly dry the paintwork.
The paintwork surface should be free of tar, dirt, waxes, oils and original manufacturer protection. Use K2 CLAY BAR to remove any residual dirt in microelements of the paintwork. Paint defects and scratches should be polished, e.g. using a polishing machine and K2 LUSTER polishing pastes.
Application:
Before applying the ceramic coating thoroughly degrease the paintwork using K2 KLINET degreaser and K2 BONA microfibre. Shake the bottle well and apply 6-8 drops to a dry wipe covering the applicator. Apply with criss-cross motion on a surface no larger than 50x50cm for at a time. Let the coating work for 1-2 minutes in a temperature of app. 20°C, then polish the surface with a microfiber cloth (a higher temperature will shorten the drying time, a lower temperature will increase it). Do not allow the coating to dry on the paintwork. After finishing the first coat, wait for at least 1 hour and then apply the next layer (for the max. hardness it’s recommended to apply 3 layers). Optionally, after finishing the last coat, K2 GRAVON RELOAD can be applied for additional glide and colour depth.
After use:
Leave the car preferably indoors in a dry place for min. 8 hours. Do not wash the car with any chemical compounds for the next 7 days. For regular coating maintenance (every 3-6 months), it is recommended to use K2 GRAVON RELOAD.
Ceramic coating
Ceramic coating is currently known in the world as the most durable form of protection for paintwork and other surfaces. It ensures the highest protection level and much higher hardness than the hardest varnishes. After use on the paintwork surface it builds a transparent and invisible layer 2-3 microns thick, thanks to which the paintwork is completely isolated from the effects of all external factors.
Technology
Based on the latest technology, we have created a product for the most demanding automotive enthusiasts, ensuring 100% satisfaction with the final effect. Ceramic coating K2 GRAVON is one of the most innovative products that we offer, based on nanotechnology and strictly designed to guarantee the best result.
Advantages
K2 GRAVON protects the surface from scratches, dirt, UV rays, grit salt, bird droppings, rains and tree sap, remnants of insects, corrosion and mechanical damages, caused for example by stone hits.
It also protects against the appearance of gloss reducing defects, especially circular scratches. Thanks to the ceramic coating, there is no need to wax the vehicle. Furthermore, due to the excellent dirt repulsion and selfcleaning properties the need for vehicle wash can be also reduced.
In contrast to waxes, ceramic coating cannot be washed off with chemical agents, and so it is the most stable manner known for surface protection. The only way the coating can be removed is machine polishing. This coating also protects against graffiti as the paint does not stick to the surface and can be easily removed.
Application
K2 GRAVON coating can be applied not only to the paintwork, but also to rubber, plastic, metal and glass. It can be highly recommended for various automotive, yachting, aviation and industrial applications.
Directions
Optimum application conditions:
Surface temperature between 10-35°C.
Apply indoors or in shaded areas.
Do not apply in excessive humidity conditions.
Surface preparation:
Clean and thoroughly dry the paintwork.
The paintwork surface should be free of tar, dirt, waxes, oils and original manufacturer protection. Use K2 CLAY BAR to remove any residual dirt in microelements of the paintwork. Paint defects and scratches should be polished, e.g. using a polishing machine and K2 LUSTER polishing pastes.
Application:
Before applying the ceramic coating thoroughly degrease the paintwork using K2 KLINET degreaser and K2 BONA microfibre. Shake the bottle well and apply 6-8 drops to a dry wipe covering the applicator. Apply with criss-cross motion on a surface no larger than 50x50cm for at a time. Let the coating work for 1-2 minutes in a temperature of app. 20°C, then polish the surface with a microfiber cloth (a higher temperature will shorten the drying time, a lower temperature will increase it). Do not allow the coating to dry on the paintwork. After finishing the first coat, wait for at least 1 hour and then apply the next layer (for the max. hardness it’s recommended to apply 3 layers). Optionally, after finishing the last coat, K2 GRAVON RELOAD can be applied for additional glide and colour depth.
After use:
Leave the car preferably indoors in a dry place for min. 8 hours. Do not wash the car with any chemical compounds for the next 7 days. For regular coating maintenance (every 3-6 months), it is recommended to use K2 GRAVON RELOAD.
The kit contents:
K2 Gravon 50 ml
Applicator 1 pc
Applicator wipes 5 pcs
Microfiber cloth 1 pc